Product Shortcut

 
 
 
 
Lovibond
 
     Water is the basis of life. And it also provides the basis of our company and its activities. At Tintometer we have always specialized in scientific and technological products which make water analysis not just simple but also dependable and reliable.
 
     For over 130 years we have concentrated on water testing and continue to set new standards in the market. More than 250 employees are working for our customers, meeting their requirements and achieving our vision: that research and development today will result in a better tomorrow.
 
     Tintometer Group is one of the leading companies in the field of water analysis. Our trade-name Lovibond® is known in over 140 countries, where we offer innovative products for the precise determination of different types of water : water in swimming pools, drinking water, waste water, surface and ground water, untreated water and effluents, through to cooling water and boiler water.
 
 
 

lovibond minikit

Minikit
Quick, Simple, Easy Operation
 
Designed for rapid water testing. Most Minikits are based on titrimetric methods. Simple tests for the analysis of boiler water, cooling water, drinking and industrial water. Using tablet reagents with long-term stability.
 
Analysis : Alkalinity, Hardness, Chloride, Cleaning Acid Strength, Cyanuric Acid, Nitrite, Organo-Phosphonate, QAC(Quaternary Ammonium Comp.), Sulphate, Sulphite, Tannin Index
 

 

Arsenic Test kit

 
Arsenic Test kit
The arsenic test is due to its high sensitivity suitable for the determination of arsenic in drinking water.
 
Resolution: 0 – 0.005 – 0.01 – 0.025 – 0.05 – 0.1 – 0.25 – 0.5 mg/l

 

Pool Tester

Pool Tester
Rapid tests - Ready to use
 
An interchangeable colour comparison chart is a competitively priced unit for the determination of disinfectants and the pH value.
  
Analysis : Acid Demand, Active Oxygen, Biguanide (PHMB), Bromine, Calcium Hardness, Chloride, Chlorine, Copper, Cyanuric Acid, Hydrogen Peroxide, pH-value, QAC, Sulphate, Total Alkalinity, Total Hardness
 
 
 
 
 

CHECKIT Comparator

CHECKIT Comparator
Low Cost – Precise – Reliable
 
A compact, handy colorimetric unit which is suitable both for mobile and stationary analysis work. Supplied with a generous number of different colour scales, it provides the basis for a comprehensive, easy-to-use colorimetric analysis system.

Analysis : Alkalinity, Aluminium, Ammonia, Bromine, Chlorine, Chlorine Dioxide, Copper, DEHA, Fluoride, Iron, Manganese, Molybdate, Nitrate, Nitrite, Ozone, pH, Phosphate, Silica, Sodiumhypochlorite, Sulfite, Zinc
 

 

Comparator 2000

Comparator 2000+
The System for Colorimetric Water Analysis
   
The Lovibond Comparator system 2000 is an extremely versatile, modular system for testing water. It is simple to use yet is uncompromising in terms of precision and reproducibility of results. It is compact and portable. The integrated prism brings the glass standards of the test discs and the coloured sample into the same field of view.
 
Analysis : Aluminium, Amine, Ammonia, Bromine, Chlorine, Chlorine Dioxide, Copper, DEHA, Fluoride, Hardness, Hazen/APHA/Pt-Co, Hydrazine, Hydrogen Peroxide, Iodine, Iron, Manganese, Molybdate, Nitrate, Nitrite, Oxygen, Ozone, pH, Phosphate, QAC(Quaternary Ammonium Comp.), Silica, Sodiumhypochlorite, Sulphide, Zinc
 

 

Nessleriser

Nessleriser 2150 & 2250
Colour Grading of Platinum-Cobalt/Hazen/APHA Colour
   
A special kit for visual colour grading of Platinum-Cobalt/Hazen/APHA Colour.
It is typically used for light yellow liquids such as water, oils and chemicals.
The colour is determined by visually matching a column of sample in a
Nessler cylinder with precalibrated coloured glass standards, which are stablecoloured and not affected by UV light or extreme environmental
conditions.
 
Nessleriser 2150 Kits  for  10 - 250 mg/l Pt
Nessleriser 2250 Kits  for  0 - 70 mg/l Pt
 
 
 
 
 
All the parameters which can be measured with Lovibond® photometer systems are set out in the table. This table also explains what parameters can be measured with which photometer system.
 
 
 
 

MD100

MD100
Small - Mobile - Rapid - Waterproof 
 
High quality interference filters with long-life LEDs as a light source without any moving parts in a transparency sample chamber. The units supply accurate, reproducible results very quickly. Other major advantages include ease of operation, ergonomic design, compact dimensions and safe handling.
 
Analysis : Aluminium, Alkalinity, Ammonia, Bromine, Chlorine, Chlorine Dioxide, COD, Copper, Cyanuric Acid, Fluoride, Hardness, Iron, Manganese, Molybdenum, Monochloramine, pH, Phosphate, Silica
 

 

MD200

MD200
Precise results using high-quality interference filters
 
Designed to meet the latest technical requirements, the MD 200 photometer can be used in practically every area of water analysis.
 
The high-precision optics with its top-quality interference filters uses long-term stable LEDs as light-source. Because there are no moving parts,
the entire measurement device requires absolutely no maintenance.
 
Precise and reproducible analysis results are obtained in a short time. The units impress with their user-friendliness, ergonomic design,compact dimensions and easy handling.
 
Analysis : Alkalinity, Aluminium, Ammonia, Bromine, Chloride, Chlorine, Chlorine Dioxide, COD, Copper, Cyanuric Acid, DEHA, Fluoride, Hardness, Hazen/APHA/Pt-Co, Hydrogen Peroxide, Iron, Manganese, Nitrite, Ozone, pH, Phosphate, Silica, Urea, Zinc
 

 

MD600

MD600

Modern, mobile photometer for rapid, reliable water testing

This new unit covers all the important parameters of water analysis, from aluminium to zinc. The high level of accuracy of Lovibond reagents and the user-friendly nature of the instrument guarantee rapid and reliable analysis of your water samples. Depending on the application, the unit will operate with tablet reagents, powder packs, liquid reagents or tube tests (16/13 mm).

The MaxiDirect operates with 6 interference filters and uses long-life LEDs as a light-source. No moving parts are involved.

Analysis : Alkalinity, Aluminium, Ammonia, Boron, Bromine, Chloride, Chlorine, Chlorine Dioxide, COD, Copper, Cyanide, Cyanuric Acid, DEHA, Fluoride, Hardness, Hazen/APHA/Pt-Co, Hydrazine, Hydrogen Peroxide, Iodine, Iron, Manganese, Molybdate, Monochloramine, Nitrate, Nitrite, Nitrogen, Oxygen, Ozone, PHMB(Biguanide), pH, Phosphate, Potassium, Silica, Sodiumhypochlorite, Sulphate, Sulphide, Sulphite, Urea, Zinc
 

 

Multi Direct

Multi Direct
Dual Beam Technology and Interference Filters for best accuracy
 
The MultiDirect is a filter photometer using interference filters at 6 different wavelengths. The unique design of the optics allows the automatic selection of the required wavelength without any moving parts. This and the dual beam technology utilizing an internal reference channel, guarantees the highest accuracy.
 
Analysis : Alkalinity, Aluminium, Ammonia, Boron, Bromine, Chloride, Chlorine, Chlorine Dioxide, COD, Copper, Cyanide, Cyanuric Acid, DEHA, Fluoride, Hardness, Hazen/APHA/Pt-Co, Hydrazine, Hydrogen Peroxide, Iodine, Iron, Manganese, Molybdate, Monochloramine, Nitrate, Nitrite, Nitrogen, Oxygen, Ozone, PHMB(Biguanide), pH, Phosphate, Potassium, Silica, Sodiumhypochlorite, Sulphate, Sulphide, Sulphite, Urea, Zinc
 

 

Spectro Direct

Spectro Direct
Spectrophotometer for water and waste water testing 330 – 900 nm

The SpectroDirect is a modern single-beam spectrophotometer with an excellent price/performance ratio that is specifically designed for water testing.

The instrument is equipped with a wide range of pre-programmed methods based on the proven range of Lovibond tube tests, tablet reagents, liquid reagents and powder reagents (Vario Powder Packs).

Analysis : Alkalinity, Aluminium, Ammonia, Arsenic, Boron, Bromine, Cadmium, Chromium, Chloride, Chlorine, Chlorine Dioxide, COD, Copper, Cyanide, Cyanuric Acid, DEHA, Fluoride, Formaldehyde, Hardness, Hazen/APHA/Pt-Co, Hydrazine, Hydrogen Peroxide, Iodine, Iron, Manganese, Molybdate, Nickel, Nitrate, Nitrite, Nitrogen, Ozone, Phenols, PHMB(Biguanide), pH-value, Phosphate, Potassium, Silica, Sulphate, Sulphide, Sulphite, TOC, Urea, Zinc
 

 

MD200 COD Vario

MD200 COD Vario Setup
Determination of the chemical oxygen demand index (ST-COD)
according to ISO 15705:2002
 
With a measuring range from 0 to 15,000 mg/l O2, the Lovibond MD200 COD VARIO photometer is suitable for waste water testing.
 
Two LEDs light sources with long-term stability (λ1 = 610 nm; λ2 = 430 nm, according to ISO 15705:2002), a waterproof sample chamber, a large digital display, and the user-friendly keypad ensure maximum operating reliability and convenience. Suppression of chloride interference up to 1000 mg/l
 
Measuring ranges : 0-150 mg/l, 0-1500 mg/l and 0-15000 mg/l
 

 

RD125

Thermoreactor RD125
 
Chemical digestion of samples is required for the photometric determination of COD, TOC, total phosphate and total nitrogen.
 
The required temperatures and reaction time can be selected by using the membrane keypad of the reactor RD 125. The unit works at three different temperatures (100 / 120 / 150 °C) and three pre-set reaction times 30 / 60 / 120 minutes). When digestion is complete, the reactor automatically switches off and gives a corresponding LED indication with short beep alarm.
 
 
 
 

TB 210 IR

TB 210 IR
Portable Turbidity Meter with Infra-Red Light source
 
The compact infrared turbidity meter TB 210 IR is designed to allow fast, precise on-site testing. The unit measures the scattered light at an angle of 90°, as stipulated in EN ISO 7027.
 
The wide measuring range from 0.01-1100 TE/F = NTU = FNU makes the instrument suitable for various applications, ranging from drinking water to waste water. As infrared light is used for measurement purposes, the unit can be used to test both coloured and colourless liquids.
 

 

TB 300 IR

TB 300 IR

New, high-precision instrument for laboratory and mobile use

Turbidity is measured according to ISO 7027 by nephelometric means (90° scattered light). The infra-red light-source permits measurement of coloured and colour-free samples. The automatic measurement range detection facility (Autorange) enables direct turbidity measurement from 0.01 to 1100 NTU with an accuracy of ± 2% up to 500 NTU and ± 3% thereafter
 

 

TB 250 WL

TB 250 WL
Portable Turbidity Meter with White Light source
Meets EPA Standard 180.1
 
Using a „white light“ source and 90° detection, the TB 250 WL meets the specifications for EPA turbidity measurement (EPA Standard 180.1).
 
A power efficient micro-circuit design allows the instrument to yield 5000 testson 4-AA alkaline batteries with an estimated 7-10 year bulb life. Integrated diagnostics confirm proper operation and accuracy. The instrument features an Auto-Ranging feature that automatically selects the correct turbidity range for your sample.
 
 
 
 
 

Senso Direct 110

Senso Direct 110
Portable Meter for pH, Conductivity and Salinity
  • High measuring accuracy
  • Light weight
  • Protective casing
  • Large digital display
  • ”Low battery” indicator
  • Two-Point Calibration

 

Senso Direct 150

Senso Direct 150
Portable Multi-Parameter for pH/ORP, Conductivity/TDS
and Dissolved Oxygen (O2) with Temperature
 
The SensoDirect 150 combines the features of several hand-held meters. It is designed for multi purpose operation and measures pH/Redox, dissolved oxygen and conductivity/TDS.
 
The SensoDirect 150 incorporates an intuitive user interface, large, easy to read display and is supplied with a sturdy handy case with electrodes, buffer solution and accessories.
 

 

Senso Direct SD300pH

Senso Direct SD300pH & SD320 CON
(IP67 Waterproof)
Portable Meter for pH/ORP, Conductivity/TDS with Temperature
 
The water-tight housing complies with IP67 and is equipped as standard with protective armouring and built-in electrode holder ensuring reliable operation even in extreme ambient conditions.
 
The support can be flipped up to hang the meter on pipes or branches. A direct, easily understood user interface, outlining the required configuration options for all three systems, facilitates meter operation both outdoors and in the laboratory. The automatic Hold function “freezes” stable measuring data in the display and indicates the presence of stable and reproducible results.
 

 

SD

SD Hand-held Meter (IP67 Waterproof)
Pen Type Meter for pH, ORP, Conductivity, TDS, Salinity
and Temperature
 
The new Lovibond® SD series comprises a range of compact, easy-to-use, hand-held instruments for the accurate measurement of pH, ORP, Con, TDS or Salt. With robust housing and fully waterproof (IP67) casing, these testers are the ideal solution for in-situ testing in environmental, industrial or pool & spa applications. 
 
 
 
 
BOD Measurement System BD600
Direct and Accurate BOD, 1-28 days measurements,
Mercury-free
 
Respirometric methods provide direct measurement of the oxygen consumed by microorganisms from an air or oxygen-enriched environment in a closed vessel under conditions of constant temperature and agitation. Carbon dioxide produced metabolically by the bacteria is chemically bound by the potassium hydroxide solution contained in the seal cup in the bottle.
 
The result is a pressure drop in the system, which is directly proportional to the BOD value and is measured by the Lovibond BOD sensor. The BOD level is then displayed directly in mg/l. The BOD values are stored in the sensor memory and can be called up on the large-format display at any time without the need for time-consuming conversion using factors. This means that test series that end on a Sunday can be evaluated during the following week without any problem.
 

 

Incubators

Thermostatically Controlled Incubators
Incubators with Glass or Standard door
 
The maintenance-free cabinets are suitable for reliable temperature control in a liquid sample over the range of 2 to 40°C (± 1°C).
  • 20 °C BOD determination
  • 4 °C Storage of waste water samples
  • 25 °C Enzyme activity (TTC test)
  • 37 °C Colony count

  •  

    Spark-free Cabinets

    Spark-free Cabinets
    Laboratory cabinets with a spark-free interior
     
    The Lovibond refrigerators in the EX range meet the requirements of this guideline and are fully equipped for daily laboratory use. The carcass consists of a sturdy sheet steel housing with impact-proof and jolt-resistant powder coating. The robust interior is made of high-strength white plastic material (PS).
     
    A tight door seal is ensured by an all-round magnetic gasket. The temperature in the refrigerator can be continuously adjusted over the range +2°C to +10°C. A room thermostat ensures constant control.
     

     

    Jar Tester

    Jar Tester
    Jar Tester with continously variable stirring speed
    for laboratory and field use.
     
    Jar testers are designed for a range of applications – such as testing the efficiency of flocculation or precipitation agents.
     
    State-of-the-art technology ensures maximum operating convenience and makes the unit maintenance-free. The main features of the laboratory jar testers are the continuously variable stirring speed, the digital display of stirring rpm, the timer function, the illuminated back panel, and the height adjustment option for the stirring blades during operation.
     
     
    for more information :   www.lovibond.com
     

    lovibond

     

    Copyright © 2011   Ilab Fluid Control Co., Ltd. All right reserved.